(as of Jan 27,2021 08:45:58 UTC – Details)
The Saramonic Blink500 is an incredibly lightweight,uItracompact and easy-to-use wireless microphone system for DSLR, Mirrorless and Video cameras, or mobile devices that delivers detailed broadcast-quality sound.
The system series is comprised of three different receivers. The RX receiver has a 3.5mm output and includes TRS and TRRS output cables, allowing it to work with any device with a 3.5mm audio input.
The clip-on transmitter has a great sounding built-in mic and it is small and light enough to clip to shirts and clothing, or you can use it as a traditional beltpack transmitter with the included SR-M1 professional lavalier microphone.
No technical knowledge of audio is required to operate. The Blink500 system operates on the interference-free 2.4GHZ spectrum and automatically hops to free channels to avoid static noise and audio dropouts.
Transmission Type: 2.4GHz Digital Frequency
Operating Range: Up to 164″ (50M)
RF Output Power: 10mW
Polar Pattern: Omnidirectional
Maximum SPL: Built-in Microphone:120dB SPL Lavalier Microphone: 110dB SPL
Sensitivity: Built-in Microphone: -42dB Lavalier Microphone: -30dB
Power Requirements: Built-in Li-ion Battery or USB-C DC 5V
Built-in Battery Life: Approx 6 hours
Antenna: PIFA Antenna
Audio Input: 3.5mm TRS Lavalier Microphone Input or Built-in Microphone
Audio Output Connector: 3.5mm Jack
Audio Output Level: -60dBV
Weight: Approx 34 (1.2 Oz)
Operating Temperature: 0 to 50 degree
Storage Temperature: -20 to +55 degree
When the receiver ready to pair, push both up&down level bottons on the TX transmitter.
Note: Built-in antennas is at the botton. So when you use this mic kit, pls keep the antenna is upward.
Blink500 Transmitter can adjust the sound volume. Three volume light indicates 6 volume levels.
Built-in battery and microphone included.
To pair transmitter ito the receiver, Take the pairing pin to press the internal band
Blink500 B1 Work With Camera
Lightweight,uItracompact and easy-to-use 2-person wireless microphone system for Cameras.
Good choice for broadcasting, interviewing, vlogging
Blink500 B1 Work With Smartphone
With a gold-plated 3.5mm TRS to TRRS Output Cable, Blink500 can work well with smartphone and tablet.
It can also clip to your shirts and clothing easily.
1x Blink500 RX Receiver with Built-in Clip and Camera Shoe Mount
1x Blink500 TX Transmitter with Built-in Microphone and Clip
1x 1(30.5 cm)gold-plated 3.5mm TRS to TRS Output Cable for Cameras
1x 1(30.5 cm)gold-plated 3.5mm TRS to TRRS Output Cable for Smartphones and Tablets
2x 1(30.5 cm) Gold-plated USB-C to USB-A Charging Cables
1x SR-M1 Omnidirectional Lavalier Microphone
1x Alligator-style Lavalier Microphone Clip
1x Foam Lavalier Windscreen
1x Pairing Pin
1x User Manual
SO ADVANCED, IT’S EFFORTLESS–The Blink 500 B1 is technically advanced that it couldn’t be easy to use. You just turn it on, and it works. But behind the scenes the Blink 500 is doing a lot to ensure excellent performance. It operates on the interference-free 2.4GHz spectrum, and automatically hops channels to avoid static noise and audio dropouts. Pairing the transmitter to the receiver is simple, letting you concentrate on storytelling and getting a great shot.
PERFECT LEVELS AND POWER–The Blink 500 transmitters have easy-to-use gain buttons to raise or lower the levels at the touch of a button, and an intelligent LED display shows you where they’re set. The internal Lithium batteries get 5 hours of life from a charge with the included charging cables. The 10-milliwatt power of the transmitter gives you an impressive range of 98 feet (30 meters) with obstacles, and 164 feet (50 meters) in open spaces.
WORK WITH CAMERAS& MOBILE DEVICES –Both TRS and TRRS output cables are included so the system will work perfectly with DSLR, mirrorless, and other kinds of cameras, as well as smartphones and tablets that have headphone jacks. The output of the receiver provides a strong, noise-free level, so when you plug it in you can adjust the input level of your camera to its lowest setting to avoid hearing the noisy preamp of your camera.
1-YEAR Saramonic Warranty.