Saramonic Blink500 B4 Wireless Lavalier Microphone System with Two Built-in Microphone Tramsmitters & Dual-Channel MFi Certified Lightning Connector Receiver for iPhone iPad

Add your review

$279.00

$279.00

Add to wishlistAdded to wishlistRemoved from wishlist 0
Add to compare


Price: $279.00
(as of Jan 19,2021 07:13:55 UTC – Details)


Product Description

saramonic blink500 microphonesaramonic blink500 microphone

Saramonic Wireless Lavalier Microphone System Blink500 B4 — 2 Transmitters with 1 Lighnting Port Receiver

Saramonic Blink500–2.4 GHZ Operation System

No technical knowledge of audio is required to operate. The Blink500 system operates on the interference-free 2.4GHZ spectrum and automatically hops to free channels to avoid static noise and audio dropouts.

Type-C Charging Port

Saramonic Blink500 is with built-in batter, supported Type-C charging. The transmitter’s internal Lithium battery gets 5 hours of life from a charge with the included charging cables, and the USB-C port can be used to power or recharge the transmitter in the field with portable USB battery packs.

Pls Notes

It will only work if you have it in camera mode. When the APP is not turned on, the lights on the receiver end are all off. The receiver light will only be on after the APP is turned on and the pairing is successful.

If the pairing is not successful, it will flash when you open the APP. So open your smartphone camera when you plug the receiver into your phone. Any problems when you use it, we will help to settle it

Note: Built-in antennas is at the botton. So when you use this mic kit, pls keep the antenna upward.

saramonic blink500 wireless lavalier microphonesaramonic blink500 wireless lavalier microphone

saramonic blink500 wireless lavalier microphonesaramonic blink500 wireless lavalier microphone

Saramonic Blink500 B4 Package List

2 x Blink 500 TX Transmitter with Built-In Microphone and Clip
1 x Blink 500 RXDi Dual-Receiver with MFi Certified Apple Lightning Connector
2 x Omnidirectional Lavalier Microphone
2 x Lavalier Microphone Clip
2 x Foam Lavalier Windscreen
2 x 1’ (30.5 cm) gold-plated USB-C to USB-A charging cable
1 x Pairing Pin

saramonic blink500 wireless lavalier microphonesaramonic blink500 wireless lavalier microphone

Specifications of Saramonic Blink500 Microphone

Frequency: 2.4GHz
Oscillator type: Gaussian Frequency-Shift Keying (GFSK)
RF Frequency Band: 2400 to 2483.5 MHz
Signal to Noise Ratio: ≥70dB
Voice Delay: ≤6ms

saramonic blink500 wireless lavalier microphonesaramonic blink500 wireless lavalier microphone

Distortion: ≤0.1%
Digital Resolution: 24-bit / 48kHz
Frequency Response: 20Hz to 16kHz
Max Operating Range: 98.4’ (30m) with Obstacles, 164’ (50m) in Open Area
Antenna: Built-in 1/4λ Wire Antenna

saramonic blink500 wireless lavalier microphonesaramonic blink500 wireless lavalier microphone

Receiver Dimensions: 3 x 0.65 x 0.43” (76 x 16.5 x 11mm)
Receiver Weight: 0.35 oz (10g)
Transmitter Dimensions: 2.5 x 1.7 x .65” (63 x 43 x 16.5mm)
Transmitter Weight: 1.2 oz (34g)
Microphone Pickup Pattern: Omnidirectional

saramonic blink500 wireless lavalier microphonesaramonic blink500 wireless lavalier microphone

Connector: MFi Certified Lighting Apple Lightning Male
Button: Pairing Pinhole Button
Indicator: 1 LED, Blue. Flashing Quickly: Paring, Flashing: Not Paired with Any TX, Solid Blue: Paired with TX
Operating temperature: 0℃ to 50℃
Storage temperature: -20℃ to +50℃

saramonic blink500 wireless lavalier microphonesaramonic blink500 wireless lavalier microphone

saramonic blink500 wireless lavalier microphonesaramonic blink500 wireless lavalier microphone

saramonic blink500 wireless lavalier microphonesaramonic blink500 wireless lavalier microphone

saramonic blink500 wireless lavalier microphonesaramonic blink500 wireless lavalier microphone

saramonic blink500 wireless lavalier microphonesaramonic blink500 wireless lavalier microphone

Pairing Guide of Saramonic Blink500 B4

1. Turn on the transmitter by long pressing the power key

2. Plug the RXDI into an IOS device Please make sure the antenna (yellow side) is oriented on the top of the device, when in landscape mode, to get the best signal

3. Insert the pairing pin into the pairing pin-hole of RXDI, press hard and the pair indicator should be quick flashing at every 0.5s.

Press both the”+” and “-” button of transmitter TX simultaneously within 10 seconds

4. The kit will be paired when the RX pair indicator is solid blue and the TX pair indicator is flash slowly

Note: To pair the second transmitter TX, just repeat thestep 3 and 4

5. You are ready to record

Pls Notes: When the APP is not turned on, the lights on the receiver end are all off. The receiver light will only be on after the APP is turned on and the pairing is successful. If the pairing is not successful, it will flash when you open the APP.

Color

White

White

Black

Black

Black

Black

2.4GHZ Spectrum

Dual Transmitter

Connector

3.5mm

3.5mm

3.5mm

Apple MFi Lightning Connector

USB Type-C

USB Type-C

Compatibility

Smartphone/Camera

Smartphone/Camera

Smartphone/Camera

IOS Devices

USB Type-C Devices

USB Type-C Devices

Operation Range

Up to 164 ft/50m

Up to 164 ft/50m

Up to 164 ft/50m

Up to 164 ft/50m

Up to 164 ft/50m

Up to 164 ft/50m

Durability

6H

6H

6H

6H

6H

6H

Applications

Wedding video, film making, broadcast interview vlog and business presentations

Wedding video, film making, broadcast interview vlog and business presentations

Live stream, film making, broadcast interview vlog and business presentations

Live stream, film making, broadcast interview vlog and business presentations

Live stream, film making, broadcast interview vlog and business presentations

Live stream, film making, broadcast interview vlog and business presentations

❤ Providing a perfect audio solution for record with no limit of distance, ideal for film making, broadcast interview and business presentations. Good choice for filmmakers, journalists, vloggers, YouTube creators
❤ Blink 500 system operates on the interference-free 2.4GHZ spectrum and automatically hops to free channels to avoid static noise and audio dropouts
❤ Pls Notes❤ — It will only work if you have it in camera mode. When the APP is not turned on, the lights on the receiver end are all off. The receiver light will only be on after the APP is turned on and the pairing is successful. If the pairing is not successful, it will flash when you open the APP. So open your smartphone camera when you plug the receiver into your phone.
❤ Saramonic Warranty — 12 months product warranty and post-sales service. Any problems when you use it, contact our customer service directly. We will help to settle it.

User Reviews

0.0 out of 5
0
0
0
0
0
Write a review

There are no reviews yet.

Be the first to review “Saramonic Blink500 B4 Wireless Lavalier Microphone System with Two Built-in Microphone Tramsmitters & Dual-Channel MFi Certified Lightning Connector Receiver for iPhone iPad”

Your email address will not be published. Required fields are marked *

Saramonic Blink500 B4 Wireless Lavalier Microphone System with Two Built-in Microphone Tramsmitters & Dual-Channel MFi Certified Lightning Connector Receiver for iPhone iPad

$279.00

Logo
Enable registration in settings - general
Compare items
  • Total (0)
Compare
0